Skip to content

Model note · Retinal Laser

Ellex Integre Pro Scan pattern scanning photocoagulator

The Integre Pro Scan is an all in one slit lamp and laser photocoagulator, with the laser cavity built into the slit lamp table rather than a separate console. It offers single spot treatment and pattern scanning for panretinal photocoagulation, controlled from a tablet style interface. It comes in green 532 nm, yellow 561 nm or yellow and red configurations; this note focuses on the green version.

The model

Maker, model and type.

Maker
Ellex Medical Pty Ltd, now Lumibird Medical
Model
Integre Pro Scan pattern scanning photocoagulator (green 532 nm configuration, LP6G)
Device type
Retinal Laser
Main document
Open the public document

Key specifications

What the public record says.

ItemValueSource
Wavelength optionsGreen 532 nm; yellow 561 nm; yellow and red 561 and 670 nmSource
Power at fibre portGreen 1.5 W (yellow 1.5 W, red 1 W)Source
Power at corneaGreen 50 to 1500 mWSource
Exposure timePattern scanning 10 to 30 ms; single spot 10 ms to 8.0 sSource
Spot sizePattern scanning 100 to 500 micrometres; single spot 50 to 1000, continuously variableSource
Aiming beamRed 635 nm, adjustable intensity, Class 2 below 1 mWSource
Laser classClass 4; Nd:DPSS 532 nm, 2 W maximumSource
Electrical and cooling100 to 240 VAC, 50/60 Hz, 800 VA; air cooledSource
Slit lamp magnification6x, 10x, 16x, 25x, 40xSource
Weight and size35 kg (laser only); 62 x 76 x 47 cmSource

Recalls

Known FDA recalls.

  • Z-1971-20232023-03-16

    Integre Pro and Pro Scan models including Pro Scan Green LP6G: with an LIO fitted, scattered beam could exit through the slit lamp port.

    FDA record

Safety

Safety warnings from the record.

  • With an LIO connected, scattered laser light could leave through the slit lamp objective lens when firing, exposing people near the slit lamp. Source
  • This is a Class 4 laser product; avoid exposure to direct or scattered radiation. Source

Sources

Where this note comes from.

Not covered: The FDA file for K142398 holds only the decision letter, not a technical summary. No operator or service manual was found, so error codes, calibration and maintenance intervals are missing. Brochure specifications vary slightly between Lumibird documents (for example green power at the fibre port), and the 2026 brochure was used.

BMEssentia knowledge drafted from public information, reviewed by Hasan Khaled Ismail on 2026-10-24. Always follow the manufacturer's instructions for use and service manual.

Retinal Laser

Other models of this device.